Denim Insulation Multi-purpose Rolls 16 in X 48 in Reviews

Frequently Asked Questions

Is UltraTouch made from recycled blue jeans?

Yep, UltraTouch is manufactured using postal service-consumer denim and cotton fibers that we source from various facilities. UltraTouch contains approx fourscore% recycled denim and cotton fibers.

Exercise I need protective clothing to install UltraTouch?

UltraTouch has no fiberglass crawling and is easy to handle. A dust mask is recommended for all structure work.

Is UltraTouch Fire Resistant?

Yeah, each natural fiber of UltraTouch is saturated with a natural fire retardant (borates) giving UltraTouch insulation a Class-A burn rating.

What are the perforations?

UltraTouch contains several pieces per purse that are perforated for off-size cavity installations. Merely mensurate your cavity and tear along a perforation to create the properly sized piece. The batt should exist roughly 0.5″ wider than the actual crenel.

Can UltraTouch exist installed in contact with recessed lighting?

Yes, UltraTouch tin can be installed in contact with recessed lighting but the lighting MUST be IC Rated. An air gap of vi inches would need to be left for non-insulated lighting cans.

What happens when UltraTouch gets wet?

UltraTouch is manufactured to breathe and accept/release the moisture it receives in a timely manner. UltraTouch also contains active mold inhibitors as well.

Volition mold touch on UltraTouch?

The fire retardant used in making UltraTouch also acts as an splendid mold and mildew inhibitor.

Does UltraTouch comprise formaldehyde?

No, UltraTouch does non contain any added formaldehyde or harmful irritants.

Does UltraTouch have a vapor barrier?

No, UltraTouch is manufactured in batt class and is unfaced. If your local edifice code requires the employ of a vapor barrier, we recommend a semi-permeable bulwark be used.

What is the best fashion to cut UltraTouch?

If a properly sized slice of insulation cannot be created using the perforations, please visit the "Cut" department of the UltraTouch Denim Insulation product folio for tips.

Installation

Full general Data

Because UltraTouch™ Denim Insulation is compressed for shipping purposes, give it a shake prior to installing. This volition assistance advance the natural rebounding properties of the fibers. Depending upon climate and environmental weather, total rebound may accept several days.

Install UltraTouch™ Denim Insulation between the studs past but fitting each batt firmly into place. UltraTouch is engineered to fit standard 16″ O.C and 24″ O.C. framing with no additional sizing required. If y'all encounter an off-size crenel, either tear along a perforation or cut to create the proper fit. Your piece of insulation should be approx. 0.5″ wider and longer than the actual cavity. If building codes require a vapor barrier, it should be applied towards the living area afterwards insulation installation.

Cut or tear the insulation to fit snugly around obstructions such as plumbing, vent lines, and electrical boxes. Utilize whatever left over pieces to fill small-scale openings effectually windows and doors.

For exterior walls, most municipalities will require a vapor barrier to be installed. The question of appropriate vapor barrier usage is non determined past Bonded Logic Inc. This outcome depends entirely on your local climate and your local edifice codes. Delight contact your local building lawmaking part and inquire almost the recommendation for your area. If a vapor barrier is required, Bonded Logic Inc recommends the utilize of a permeable bulwark. A permeable bulwark will allow your walls to "breathe" while nevertheless stopping wet transfer.

Helpful Hint: Did you know that a single continuous vapor retarder is a more than constructive vapor retarder than individual kraft faced batt'southward? It also requires less labor!

Walls

UltraTouch™ Denim Insulation are a friction fit product. This ways that they are slightly oversized for standard wall cavities. To install, simply insert the batt betwixt the studding and tuck it in to ensure a tight fit. Estimate thirty% of the batt's in each bag of UltraTouch are perforated for easy violent to fit "off-size" cavities. Your slice of insulation should be approx. 0.five″ wider and longer than the actual cavity.

Ceilings

UltraTouch™ Denim Insulation can exist layered to attain higher R-Values in ceiling applications. It is all-time to alternate the direction of the batt'south in each layer. UltraTouch can be secured to the joists using either wire or a mesh. This will ensure the batt's remain in place until drywall has been installed.

Floors/Crawl Spaces

UltraTouch™ Denim Insulation is an effective choice for insulating floors and crawlspaces as well. The insulation should be secured to floor joists or crawl space cavities in the same manner as ceiling applications, using either a mesh or wire support system. For crawlspaces specifically, a system of vapor barriers is recommended. The blank ground should be covered with a barrier as well as practical to the cavities earlier the insulation is installed (facing the warm side of the subfloor)

Cut

Insul-Knife
UltraTouch™ Denim Insulation is essentially a cloth product and is therefore different to cut than traditional insulating products. The best way to cutting UltraTouch is with a non-motorized product called the Insul-Pocketknife. The Insul-Knife is bachelor from Cepco Tool and tin can be purchased from Amazon.com as well equally directly from Cepco Tool atwww.cepcotool.com.

Bosch Cream Rubber Cutter
For motorized cut, the Bosch Foam Rubber Cutter 1575A works extremely well. A circular saw works well also. A fine molar bract should be used and the blade should be installed with the teeth facing contrary of normal cutting installations. This volition minimize shredding and tearing of the cloth and give you a smooth, clean cut.

Mitt-Held Grinding Tool
A hand-held grinding tool is an constructive fashion to cut UltraTouch™ Denim Insulation. These tools come in a diversity of sizes and some are even cordless. This tool spins at a very loftier RPM, and so caution should exist used at all times. Someday you are working with a motorized tool, the proper protective measures should be followed including wearing rubber glasses or other eyewear.

Total-Length Table Saw
The quickest and easiest way to cut UltraTouch™ Denim Insulation in full lengths is the employ of a table saw. A table saw will allow you lot to easily cut the fabric and change widths accurately and quickly. A fine tooth blade should be used and should be installed in reverse of normal operation (the teeth should be at an contrary bending than if cut wood). As with whatsoever power tool, circumspection should exist taken and proper eye protection should be used.

norriswearprapart.blogspot.com

Source: https://www.bondedlogic.com/ultratouch-denim-insulation/

Share this post